Our skilled staff observes, inspects, and measures the internal state of the product, confirms the positional relationship of voids, voids, and foreign substances, checks the fitting state (fitting) of specimens such as cracks and defects, measures dimensions, and malfunctions. Inspect analysis etc. from the optimum direction with the highest resolution.
Please use it for observing the internal state of materials, electronic parts, precision machine parts, chemical products, molded products, assemblies, etc., checking the fitting state of molded products and assemblies, and measuring dimensions.
There is also a device rental service. Please use it when you need a large amount of non-destructive inspection but want to keep costs down. The ScanXmate series is easy to operate, and the operator also directs you when you use it for the first time, so even beginners can shoot immediately. Please feel free to ask about measurement and observation methods.
* Please feel free to contact us with any questions regarding photography such as “Is it possible to take CT scans of this material?” And “How many µm voids can be confirmed with this sample size?”
Since 3 cross sections can be observed at any position, it is possible to identify the location of voids, voids, foreign matter, cracks, defects, etc.
You can check the details of samples such as prototypes and precious fossils, which are unique in the world, by converting them into non-destructive 3D data.
Three-dimensional analysis software can be used to perform various quantitative analyzes such as dimension, angle measurement, voids, void volume calculation, and fiber orientation.
It outputs STL data and can be used for 3D printers.
* Customers need to prepare optional software to use it.
Data can be delivered within 2 days from the arrival of the sample.
* Please contact us as the delivery time may vary depending on the equipment schedule, sample shape, and quantity.
You can choose the most reasonable shooting course according to the number of samples.
| Number of shots | Amount | Number of shots | Amount | Number of shots | Amount |
|---|---|---|---|---|---|
| 1 | 60,000 yen | 7 | 150,000 yen | 13 | 240,000 yen |
| 2 | 75,000 yen | 8 | 165,000 yen | 14 | 255,000 yen |
| 3 | 90,000 yen | 9 | 180,000 yen | 15 | 270,000 yen |
| 4 | 105,000 yen | 10 | 195,000 yen | 16 | 285,000 yen |
| 5 | 120,000 yen | 11 | 210,000 yen | 17 | 300,000 yen |
| 6 | 135,000 yen | 12 | 225,000 yen | 18 | 315,000 yen |
(There is a direction by the operator when using for the first time)
We have created a list of samples for which X-ray CT scans have been taken with Comscantecno by industry and purpose. We shoot a wide variety of samples under optimal conditions and provide images that satisfy our customers.
Please let us know the purpose of the image (X-ray CT image, shape extraction, defect analysis, etc.), the sample you want to observe (size / material / weight, shape, imaged part, number), and the format of the delivery data.
Our staff will send you a quotation according to the contents of your inquiry.
We may also call you for more information.
* For difficult samples, we may ask you to send one or two samples and take a pre-shoot to judge the quality of the image, to see if you can get the desired output for the desired part.
We will send you a sample and take a picture.
If you wish, you can witness the shooting.
We will send you a breaking image (3 cross-section images) by e-mail and ask you to confirm that the desired image has been taken.
After shooting, we will deliver the shooting data to the designated location and return the sample.
